Table of Contents
Advertisement
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619
Appendix
Using the keypad protocol
Step
by
Under CENTREX, the keypad protocol enables additional services from other
Step
providers to be used, e.g voicemail or announcement services.
Contact your provider for more information on keypad control.
Activating/deactivating automatic keypad switchover
Pressing '*' and '#' automatically switches the system over to the keypad pro-
tocol. The following dialling codes are transmitted to the exchange as keypad
character sequences. If automatic keypad switchover is deactivated, dialling '*'
and '#' has no effect.
1.
Press
Select using [ ] and [OK]:
2.
Spec. function
The activated automatic keypad switchover is highlighted.
Activating the keypad protocol during a call only
This setting only applies to the external call currently in progress.
Press
1.
Select using [ ] and [OK]:
2.
The activated keypad function is automatically reset when the call is ended.
Activating the keypad protocol for the current connection
You can switch to the keypad protocol for the duration of the next call.
Press
1.
Select using [ ] and [OK]:
2.
Activating/deactivating the dialling of * and #
This function is important for using telecom features, e.g. querying an answer-
ing machine in the telecom network.
Press
1.
2.
Select using [ ] and [OK]:
Spec. function
Activated dialling of * and # is highlighted.
56
for selection menus.
Service Set up
Dial properties
for the menu.
Keypad On
for selection menus.
Service Set up
for selection menus.
Service Set up
Dial properties
giga3070KAP .fm
Settings
System settings
Auto Keypad
.
Call preparat.
Settings
System settings
Dial * and #
.
09.01.01
Temp. Keypad
.
Advertisement
Table of Contents
