Table of Contents
Advertisement
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619
Connecting a PC to the base station
Operating Gigaset talk&surf with Windows 98, Win ME
Step
by
Registering Gigaset M105 Data at Gigaset 3070/3075isdn
Step
Proceed as follows:
1.
Install Gigaset M105 Data
2. Start the Gigaset M105 Data configuration program via >
> Gigaset M100 Data > Gigaset Setup
3. Select the window "
4. Check that your Gigaset M105 Data has been set to the type
(default).
5. Set the Gigaset 3070/3075isdn to registration mode (press LED).
6. Click the
0000).
7 .
Click
quired base is ready for registration, the local adapter logs on. Check that
the base is ready for registration.
The two devices are automatically synchronised. An entry now appears in
the
8. Close the program with
9. Restart your computer.
1.
2.
3.
14
Local adapter
Register
button and enter the PIN of the partner station (default
OK
. The registration procedure starts and the message "
Registered adapter
list.
OK
.
Once Gigaset M105 Data has been installed, the telephony driver for
your Gigaset 3070/3075isdn has to be updated. You have three op-
tions here:
You have not yet operated your Gigaset 3070/3075isdn on your PC via
the USB cable:
You must follow the instructions in the sections "PC connection via
USB" and "Installing Talk&surf Software" in the PC installation instruc-
tions provided with Gigaset 3070/3075isdn. When asked which port
is to be used for accessing Gigaset 3070/3075isdn, specify the virtual
COM port for Gigaset M105 Data.
You have operated Gigaset 3070/3075isdn on your PC via the USB ca-
ble before:
Install the talk&surf software again. Start the installation procedure for
the talk&surf software and when asked which port is to be used for
accessing Gigaset 3070/3075isdn, specify the virtual COM port for Gi-
*
gaset M105 Data
and continue with the installation.
You have operated your Gigaset 3070/3075 isdn on your PC via the
USB cable before and you are an experienced PC user:
Reset the telephony driver by selecting the following:
tings > Control Panel > Telephony
DECT/ISDN TAPI Service Provider
here. Then select the
Configure
Port
. Click on
, then on
port for Gigaset M105 Data (see footnote on page 15). Confirm twice
OK
Close
with
and then
.
giga3070KAP .fm
Start > Programs
.
" , a free registration location is selected.
" appears on the screen.
. Select the
Telephony Drivers
Serial
and select the virtual COM
09.01.01
Portable part
If the re-
> Start > Set-
tab
and click on
Advertisement
Table of Contents
