Table of Contents
Advertisement
Built under or
built in appliance
installation
Removing the
transport bolts
Before removing the
transport bolts
Removing the transport
bolts
40
The appliance must be built under or built in prior to
connecting the power supply.
The appliance can be built into or under a kitchen
work surface. For this purpose, a recess width of
60 cm is required.
q The washing machine must only be installed under
a one piece worktop that is permanently attached
to the surrounding cabinets.
Caution
For safety reasons in built under installation, a metal
cover* must be assembled by a specialist in place of
the appliance cover plate.
*
The metal cover (set) can be obtained from
a specialist store or the Customer Service.
Caution
The transport bolts must always be removed before
using the appliance for the first time.
1. Take the hose out of the holders.
2. Detach the elbow.
3. Release all four transport bolts using the SW 13
wrench until they can be moved freely.
4. Completely remove transport bolts by reaching
through the open washing machine door and
pulling the drum forwards slightly.
Advertisement
Table of Contents
