Keypad Lock; Making Calls; Directory And Speed Dial List; Answering A Call - Gigaset A140 Manual

Activating/deactivating the keypad lock
You can "lock" the keys on the handset to protect
the keypad against inadvertent activation.
To activate: press the hash key
The display shows the icon
To deactivate: press the hash key
The keypad lock deactivates automatically when
you receive a call and activates again after the call.
When the keypad lock is active you cannot even
call emergency numbers!

Making calls

Making external calls/Ending a call
External calls are calls using the public telephone
network.
~
(Enter the number)
The number is dialled. (Or you can first press
[dial tone] and then enter the number.) During the
call you can adjust the earpiece volume with
s
and .
End the call/cancel dialling:
Press the end call key
You can automatically insert a network provider
prefix before any number (see Menu Tree,
page 9).
LECT,

Answering a call

Your handset rings and you wish to take the call:
c
Press the talk key .
If "Auto Answer" is active (page 6) just lift the
handset out of its base/charging cradle.

Calling Line Identification

When you get a call, the caller's number will be dis-
played on your handset; the caller's name will be
displayed if it is stored in the directory .
Requirements:
1 You have asked your network provider for the
caller's number (CLIP) to be displayed on your
handset screen.
2 The caller has asked the network provider for
his number to be identified (CLI).
The display shows
CLIP, if the caller has withheld CLI, or
WITHHELD
if it has not been requested.
UNAVAILABLE
R
and hold.
Ø
.
R
and hold.
¢
c
.
a
.
PRESE-
if you have not requested
3
Muting
You can mute you handset when making external
calls. The other party hears a wait melody. You do
not hear your caller either.
Press the display key
melody).
To cancel the function: Press
Handsfree (Gigaset A240 only)
After you enter the number you can immediately
call in handsfree mode by a long press on
c
(key lights up continuously). During a call you
can switch between earpiece and handsfree mode
by pressing
Using the directory and other
lists
c

Directory and speed dial list

t
These two lists are used in the same way.
To open the directory: Press
To open the speed dial list: Press
Directory: Can store up to 20 numbers and associ-
ated names.
Speed dial list: Can store up to 8 numbers (12 dig-
its max.), e.g. private phone numbers, prefixes of
network providers ("Call-by-Call") etc.
h
Press the
then press
MENU
available:
EDIT ENTRY
NEW ENTRY
SHOW ENTRY
DELETE
Clear the list:
Storing a number in the directory/speed dial list
¢
h C
/
MENU
Enter phone number and confirm.
~OK
Directory: Enter name and confirm.
~OK
Speed dial: Enter the digit of the
required speed dial key (2–9), then
enter the name and confirm.
Long press (back to idle status).
a
Table for text/numerical entry: see page 6.
Cursor control: see page 1.
. The call is 'held' (wait
INT
a
c
; adjust the volume with
h
.
C
C
or key to open the required list
. The following functions are
Add/edit number and use to
dial
Save new phone number
Show/edit number
Delete a single entry
¢ ¢
h C L
/
MENU
¢
NEW ENTRY
briefly.
c
t s
or .
.
¢
.
OK