Barging In On An External Call; Paging - Gigaset A200 Brief Overview

Gigaset A200 / IM eng / A31008-A200-J101-2-7619 / registration.fm / 12.06.2003
Operating more than one handset

Barging in on an external call

You are on an external call. An internal party can barge in on this call and take part in
the conversation. The barge-in is signalled to all participants in the call by a signal tone.
It is only possible if the function BARGE IN is activated on the base station (default sta-
tus: deactivated).
Activating/deactivating the function
¢
MENU
BASE SET
[__________] [______________________________________________] [__________]
BARGE IN
Barging in
LINE IN USE is shown on your handset display. You would like to link up with an
existing external call.
If one of the parties presses the end call key
i
The connection between the other handset and the external party
remains open.

Paging

If you have mislaid your handset, you can search for it with the help of the base station.
Press the registration/paging key (page 20) on the front of the base station for no more
than 2 secs. All handsets will then ring at the same time (paging).
To end the search, either press the registration/paging key again briefly or press the end
c
call key on a handset.
If you press the registration/paging key for more than 2 seconds, the base
i
station will then go into registration mode. The handsets will then not
ring.
24
¢
ADD FEATURES
Select and confirm, in order to activate or deactivate
OK
‰
link up (
Long press (return to idle status).
Press the talk key. You are linked into the call.
All parties hear a signal tone. CONFERENCE is
shown in your handset display.
End barge in:
Press end call key (signal tone).
= on).
a
, a signal tone sounds.