Base Station Settings; Changing The System-Pin; Return Base Station To Factory (Default) Settings - Gigaset A200 Brief Overview

Gigaset A200 / IM eng / A31008-A200-J101-2-7619 / settings_bs_hs.fm / 12.06.2003
list and network access list as well as registration of the handset with the base station
remain unchanged.
[_______________]
MENU
[______________________________________________] [__________]
RESET ?

Base station settings

All base station settings are made via a registered Gigaset A 2 handset.

Changing the system-PIN

To protect the system settings from unauthorised access you should change the system-
PIN (factory setting: 0000) to a PIN that only you know.
¢
MENU
BASE SET
[______]
OK
[______]
OK
[______]
OK

Return base station to factory (default) settings

A reset does not alter the system PIN; handsets remain registered. Overview of base
default settings see page 31.
¢
MENU
BASE SET
[______]
OK
[______________________________________________] [__________]
RESET ?
Press display key to open menu.
Use the keys
Confirm safety check.
OK
¢
SYSTEM PIN
Enter the currently valid system PIN (4 digits) and
confirm. For security reasons the entry is shown as
four stars ( **** ).
Enter new PIN (4 digits) and confirm.
Repeat new system PIN and confirm.
Long press (return to idle status).
¢
BASE RESET
Enter system PIN and confirm.
Confirm safety check.
OK
Base station settings
O I
to call up the procedure.
27