Hardware Monitor & Cpu Pnp Setup Page - MATSONIC MS7191SM User Manual

Parallel Port Mode
Use this item to determine the parallel port
mode. You can select Normal, ECP (Extended
Capabilities Port), EPP (Enhanced Parallel
Port), or ECP + EPP.
Parallel Port IRQ
Use this item to assign an IRQ to the parallel
port.
Parallel Port DMA
Use this item to assign a DMA channel to the
parallel port.
Onboard IDE
Use this item to enable or disable either of the
two onboard IDE channels, Primary or
Secondary.
Hardware Monitor & CPU PnP Setup Page
This page lets you set the parameters for hardware monitoring and
manually or automatically configure the mainboard for the CPU.
CPU Speed
Use this item to set the internal clock speed of
your CPU.
CPU Clock
Use this item to increase the clock speed of
Overdrive
your CPU. We recommend that you do not try
to run your CPU faster than its rated speed.

! 


   
37