1 Setting up the System
Workstation Position
Please take note of the following criteria for creating a practical and safe workplace when setting up
your computer:
The system can be used anywhere the temperature is suitable for people. However, rooms
with humidity over 70 %, and dusty or dirty areas are not appropriate. In addition, do not
expose the workstation to any temperatures over +35 °C or under +10 °C.
Make sure that the cables connecting the workstation to peripheral devices are not tight.
Make sure that all power and connection cables are positioned so that they are not trip
hazards.
When you save data to your workstation's hard disks or to a floppy disk, they are stored as
magnetic information on the media. Make sure that they are not damaged by magnetic or
electromagnetic fields.
Because the electronics in your computer can be damaged by jarring, no mechanical devices
should be placed on the same surface as the workstation. This is especially important for
impact printers whose vibrations could damage the hard disk.
ATTENTION
In order to fully separate the workstation from current, the power cord must be removed from the
wall outlet.
ATTENTION
To ensure stability, the floor stands must be turned outwards.
MAXDATA FUSION 6000 I
7
Need help?
Do you have a question about the FUSION 6000 I and is the answer not in the manual?