Martin MAC 500E User Manual page 11

The Shortcuts ( SP EC/ SCUT
tion or turns in one direction only. The setting may be overridden on the speed channel in vector mode.
R o t a t i n g g o b o s
The MAC 500/E has 5 rotating positions for glass or metal gobos. Gobos may be rotated in both directions at varying
speeds or indexed to any position. The function and gobo are selected on channel 5 and the velocity or index position
are selected on channel 6. Setting the rotating-gobo speed to "blackout" in vector mode causes the shutter to black out
the light while the wheel turns from one position to another and, if indexing is selected, while the gobo rotates between
positions.
To change the gobos, see "Gobo orientation and positions" on page 17.
I r i s
The iris diameter ranges from 100 to 15 percent open. There are 6 variable/random pulsating iris effects callable on
channel 9. These can be disabled by switching DMX Macros (
ting ( SPE C/I RR ) closes the iris slightly from full open to eliminate a halo effect seen in very early units.
R o t a t i n g p r i s m / v a r i a b l e f r o s t
The 3-facet prism can rotate in both directions at varying speeds. There are 8 preprogrammed macros that combine the
prism with rotating gobos on channel 10. These can be disabled by switching DMX Macros (
Setting the prism speed to "blackout" in vector mode causes the shutter to black out the light while the prism moves in
and out.
An optional frost filter may be installed in place of the rotating prism to provide a variable frost effect. If the frost filter
is installed, the fixture type personality (
protocol.
D i m m e r / s h u t t e r
The mechanical dimmer/shutter system provides smooth, high-resolution 100 percent dimming, "instant" open and
blackout, random and variable strobe effects up to 23 Hz, and random and variable pulses in which the dimmer snaps
open and slowly dims or snaps closed and slowly opens. The pulse and random strobe effects can be disabled by
S PEC /dM AC
switching DMX Macros (
The Dimmer Mode ( SPE C/dM Od
The fade time must be 0 to simulate tungsten dimming.
) setting determines whether the gobo wheel takes the shortest path to the next posi-
S PEC / F TYP ) must be set to "
) off.
) setting allows you to select between linear or simulated tungsten fade curves.
Operation
SP EC/d MAC ) off. The iris reflection reduction set-
F ROS " to enable the frost variation of the
SP EC/ dMA C ) off.
11