Siemens Gigaset A580 User Giude page 12

Placing the handset in the base station and registering
Place handset
into base
Menu
Handset is
registering ë
Ð
Þ
Menu
If you have purchased a model with multiple handsets, repeat the registra-
tion process for each handset. Handsets are assigned the lowest available inter-
nal number (1–4). If more than one handset is registered to the base station
the internal handset number appears on the display, e.g.
numbers 1–4 are already assigned to other devices, the number 4 will be over-
written.
Please note
u
Each key press interrupts the automatic registration.
u
If automatic registration does not work, the handset will have to be
registered manually (
To charge the batteries, leave the handset in the charging cradle.
Please note
Only place the handset in the base station or charging cradle that is
intended for it.
Should you have any questions and problems
Before you can use the phone, you must
first register the handset to the base station.
¤
Place the handset with the display
facing up in the base station.
The handset registers automatically.
Registration can take up to 5 minutes.
Do not remove the handset from the
base station during this time.
V
The following is displayed after successful
registration:
u
the strength of the reception signal
between base station and handset:
– good to poor: Ð i Ñ Ò
– no reception: | flashes
u
battery charge status:
– = e V U (flat to full)
– = flashes: batteries almost flat
– e V U flashes: charging proce-
¢
page 41).
dure
INT
¢
page 49.
First steps
2. If the internal
11