Setting Up The Handset - Siemens Gigaset AS180 User Manual

Connecting the charging cradle (if included)
If you need to disconnect the plug from the charging cradle,
press the release button
Setting up the handset for use
Inserting the batteries and closing the battery cover
Use only the rechargeable batteries (
Communications GmbH
this could result in significant health risks and damage to property. For example, the
outer casing of the batteries could be destroyed or the batteries could explode. The
phone could also malfunction or be damaged as a result of using batteries that are
not of the recommended type.
* Gigaset Communications GmbH is a trademark licensee of Siemens AG.
¤
Insert the batteries the right
way round.
The polarity is indicated in/on
the battery compartment.
If you need to open the battery cover,
for instance to replace the batteries,
place your fingertip in the grooved area
on the top of the cover and slide down.
2
1
1
The display is protected by a plastic film.
Please remove the protective film!
Warning
*
4
¤
Connect the flat plug from the power supply 1.
¤
Plug the mains adapter into the plug socket 2.
and disconnect the plug 2.
¢
page 11) recommended by Gigaset
. Never use conventional (non-rechargeable) batteries, as
¤
Slide the battery cover back into the
main casing until it clicks into place.
2
1
+ –