Adjusting Loudness; Using Subwoofer Output - Pioneer AVH-P5050DVD Operation Manual

Section
03 Operating this unit
FLAT Flat
SUPER BASS
Super bass
! CUSTOM is an adjusted equalizer curve
that you create. If you make adjustments to
an equalizer curve, the equalizer curve set-
ting is memorized in CUSTOM.
! When FLAT is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT and a set equalizer curve.
% Press EQ to select the equalizer.
Press EQ repeatedly to switch between the fol-
lowing equalizers:
POWERFUL—NATURAL—VOCAL—CUSTOM
—FLAT—SUPER BASS
Adjusting equalizer curves
You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (LOW/MID/HIGH).
! The actual range of the adjustments are dif-
ferent depending on which equalizer curve
is selected.
Level (dB)
Center frequency
1 Touch PARAMETRIC EQ on the audio
function menu.
2 Touch c or d next to EQ SELECT to se-
lect an equalizer curve.
POWERFUL—NATURAL—VOCAL—CUSTOM
—FLAT—SUPER BASS
3 Touch c or d next to BAND to select
the equalizer band to adjust.
LOW (low)—MID (mid)—HIGH (high)
38
En
Q=2W
Q=2N
Frequency (Hz)
4 Touch c or d next to FREQUENCY to se-
lect the frequency to adjust.
Low: 40Hz—80Hz—100Hz—160Hz
Mid: 200Hz—500Hz—1kHz—2kHz
High: 3.15kHz—8kHz—10kHz—12.5kHz
5 Touch c or d next to Q.FACTOR to se-
lect the Q factor.
2W—1W—1N—2N
6 Touch a or b to adjust the level of the
equalizer band.
+12dB to -12dB is displayed as the level is in-
creased or decreased.
# You can then select another band and adjust
the level.

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Touch LOUDNESS on the audio function
menu.
2 Touch d to turn loudness on.
# To turn loudness off, touch c.
3 Touch c or d to select a desired level.
LOW (low)—MID (mid)—HIGH (high)

Using subwoofer output

This unit is equipped with a subwoofer output
which can be turned on or off.
! When the subwoofer output is on, you can
adjust the cut-off frequency and the output
level of the subwoofer.
1 Touch SUB WOOFER on the audio func-
tion menu.
2 Touch d next to SUB WOOFER to turn
subwoofer output on.
# To turn subwoofer output off, touch c.