Demo Mode; Adjusting The Response Positions Of The Touch Panels (Touch Panel Calibration) - Pioneer AVH-5300DVD Operation Manual

Section
02 Before you start
! After completing connections
! When erasing all stored settings
! When resetting the unit to its initial (factory)
settings

Demo mode

The feature demo automatically starts when
you select Source Off for the source and con-
tinues while the ignition switch is set to ACC
or ON. To cancel the feature demo, press and
hold MUTE/ . Press and hold MUTE/
again to restart. Operating the feature demo
while the car engine is turned off it may drain
the battery power.
Important
Failure to connect the red lead (ACC) of this unit
to a terminal coupled with ignition switch on/off
operations may lead to battery drain.
Adjusting the response
positions of the touch panels
(Touch Panel Calibration)
If you feel that the touch panel keys on the
screen deviate from the actual positions that
respond to your touch, adjust the response po-
sitions of the touch panel. Refer to Adjusting
the response positions of the touch panels
(Touch Panel Calibration) on page 57.
8
En