System Control Connections; Tv System Switch (Except For Taiwan Model) - Pioneer DV-S77 Operating Insructions

System Control Connections

Using a commercially available cord with a mini plug
(3.5 mm dia. with no resistance) to connect this player's
CONTROL IN jack to the CONTROL OUT jack of
another PIONEER component bearing the Î mark, you
can control the player as though it were a component in
a system (system control).
• If you connect for system control, you cannot operate
the player directly. Point the remote control unit at the
component (AV amplifier, etc.) connected to the
CONTROL OUT jack to operate.
• When controlling as a system, be sure to make a
connection to the amplifier using an audio or video
cord, even when using only digital components.
• For details, refer to the operation manuals of the
connected components.
525i
(480i)
SELECT
CONTROL DIGITAL OUT TV SYSTEM
OUT IN
NTSC
PAL
AUTO
OPT COAX
CONTROL
IN
Pioneer component with Î mark.
16
P
Y B P R
525p
(480p)
MENU
D2 1 2 1 2
COMPONENT VIDEO OUT S-VIDEO OUT VIDEO OUT
AC IN
AUDIO OUT
R L
2 2
1 1
CONTROL
OUT
TV SYSTEM switch
(except for Taiwan model)
Video output changes as follows according to the
playback disc's recorded format.
NTSC = PAL, PAL = NTSC conversion is possible on
Video CDs. PAL = NTSC conversion is not possible on
DVDs. When the TV SYSTEM switch is set to the
AUTO position, the disc's format will be output as is.
When a CD or disc is not loaded, the previous video
output format will be selected.
TV SYSTEM
NTSC
Disc
Position of TV SYSTEM switch
Format
Type
NTSC
NTSC
DVD NTSC
PAL
NTSC
NTSC
Video CD
NTSC
PAL
NTSC
CD, No disc
About MOD. (Modulation) PAL
• SHRINK
Most models of the newly developed countdown PAL
TV system detect 50 Hz (PAL)/60 Hz (NTSC) and
automatically switch vertical amplitude, resulting in a
display without vertical shrinkage.
• If your PAL TV does not have a V-Hold control, you
may not be able to view NTSC disc because the
picture may roll. If the TV has a V-Hold control, adjust
it until the picture stops rolling. On some TVs, the
picture may shrink vertically, leaving black bands at
the top and bottom of the screen. This is not a
malfunction; it is caused by the NTSC = PAL
conversion.
PAL
AUTO
Output format
PAL AUTO
MOD. PAL NTSC
PAL PAL
MOD. PAL NTSC
PAL PAL
PAL NTSC or PAL