Playback In A Desired Order (Program Play); Programming Dvds - Pioneer DV-S77 Operating Insructions

Playback in a Desired Order
(Program Play)
The titles and chapters within a title on a DVD and
similarly the tracks on a Video CD or CD can be arranged
to play in the order you want.

Programming DVDs

A program with a maximum of 24 steps can be
memorized.
2, 3
STOP 7
4
1
Press PROGRAM.
The Program screen appears.
Program Chapter Program Title
Current: Title 7 Chapter 1
Title 1 (Chapter 1~ 18)
Program Memory – Off
Move Play
ENTER PROGRAM
2
Move the cursor control joystick right or
left to select either Chapter or Title
program.
3
Once the program type is selected. Move
the cursor control joystick down to enter
the program window.
When [Program Chapter] is selected, you must
also select what title the chapters to be
programmed are in. Use the cursor control
joystick up to highlight "Title" and then use the
number buttons to enter the title number to be
used.
48
– DVD/Video CD/CD
OPEN /
CLOSE
DISPLAY AUDIO SUBTITLE ANGLE
SET UP TOP MENU
MENU
5
ENTER
FUNCTION VIDEO
5
MEMORY ADJUST DIMMER JOG MODE
F.MEM V.ADJ FL JOG
STOP PLAY PAUSE
7 3 8
PREVIOUS NEXT REV FWD
4 ¢ 1 ¡
RETURN STEP / SLOW SEARCH MODE
e E
CLEAR
CLEAR
1 2 3 C
4 5 6 + 10
7 8 9 0
1
RANDOM REPEAT PROGRAM
A-B
LAST CONDITION
MEMORY MEMORY
Î
DVD PLAYER
Program Chapter Program Title
2(/20)
Current: Title
Program Memory – Off
Exit
Move ENTER Play PROGRAM
4
In the program window, use the number
buttons to enter the numbers of the titles
or chapters in the order you want to
program them in.
• To program DVD titles/chapters 9, 7, and 18 in
order, press 9, 7, +10 and 8.
Program Chapter Program Title
Current: Title
Title 1
09 07 18
Program Memory – Off
Move
ENTER
5
Press ENTER or PLAY 3.
• Playback starts in the set order.
• Press PROGRAM to return to the previous
display. The program will not begin until PLAY 3
is pressed.
To program a pause in a program
Press PAUSE 8 instead of a number button.
"8" appears on the screen and the pause can be
programmed.
A pause cannot be programmed as the first or last
position in a program, and two or more pauses cannot
be programmed in succession.
To delete a number:
Move the cursor control joystick to highlight the
incorrect number and then press CLEAR.
The number is deleted. If the number was before
another number, the later numbers are reordered
automatically.
To insert a number:
Move the cursor control joystick to highlight the
number to be placed after the new number and then
press the number button(s) of the number to be
inserted.
The new number is inserted before the previously
Exit
selected number.
To stop program play
Press STOP 7.
Notes
• When programming chapters, chapters not programmed
may appear on the screen. This is not a malfunction.
• Programming may not be possible with certain DVD discs.
On these types of discs, the
screen when programming is attempted.
• Only chapters within the same title can be programmed
during chapter programming.
Program Chapter Program Title
7 Chapter 1 Current: Title
(Chapter 1~ 18)
09 07 18
Program Memory – Off
Play Exit
PROGRAM Move
mark will appear on the
2(/20)
ENTER Play PROGRAM Exit