Pioneer DVR-541H-S Operating Instructions Manual page 72

Editing
07
Erase Section
HDD DVD (VR) DVD-RAM
Using this command you can delete a part of
a title, ideal for cutting out the commercial
breaks in a recording made from the TV.
1 Highlight the title containing
the section you want to erase.
ENTER
2 Select 'Edit' > 'Erase Section'
from the command menu panel.
ENTER
3 HDD only: Select the type of
edit.
!
Please select the type of editing.
Video Mode Compatible Editing is
recommended for compatibility with
high-speed copying.
Video Mode Compatible Editing
• For more information about these
options, see Editing accuracy on page 68.
72
En
DVD RECORDER
Frame Accurate Editing
4 Highlight 'From' then use the
playback controls ( , ,
find the start of the section to erase, then
press ENTER.
The bar at the bottom of the screen indicates
the current play position in the title. After
pressing ENTER, a marker shows the start of
the section.
Set Thumbnail (HDD)
OK
OK
Exit
Exit
ENTER
5 Highlight 'To' then, in the
same way, find the end of the section to
erase, then press ENTER.
After pressing ENTER, another marker
indicates the end of the section, with the
section itself marked in red.
ENTER
6 Select 'Yes' to confirm, or 'No'
to cancel.
In the thumbnail viewer you can see a few
seconds of video either side of the marked
section to see how the edit will look.
• When editing VR mode Original content,
you may not be able to erase very short
sections (less than five seconds).
, , etc.) to
23:00 Sun 3/12 4ch SP
Rec. time 2h00m
10-1 00.00.09.15
Play Pause