Pioneer DVR-541H-S Operating Instructions Manual page 29

Getting started
Set the date (day/month/year) and
time, then press ENTER to make all
the settings.
k Setting Manual Clock Setting
Line System
Date SUN
er Save
P
Time
p Navigator p Navigator
Time Zone
D.S.T
• Use the buttons to change the
value in the highlighted field.
• Use the buttons to move from one
field to another.
• Press ENTER to finish setting the time.
ENTER
7 Select the TV screen type,
'Wide (16:9)' or 'Standard (4:3)'.
k Setting TV Screen Size
Line System
er Save Wide (16:9)
P Standard (4:3)
p Navigator p Navigator
ENTER
8 Select whether or not your TV
is compatible with progressive scan
video.
k Setting Progressive
Line System
er Save Compatible
P Not Compatible Not Compatible
p Navigator p Navigator Don't Know
• Note that progressive scan video is only
output through the component video
outputs and only when the video source
is NTSC (see Using other types of video
output on page 17).
2/2
1 / 01 / 2006
0 : 00
Mexico
Baja California Norte
On
9 Press to continue after reading
ENTER
the HDD caution.
k Setting In the event of HDD failure, recordings may
be lost or normal playback/recording may
Line System
not be possible.
er Save
As recordings might be lost in case of a HDD
P
failure, we recommend to use the HDD only
as temporary storage media.
p Navigator p Navigator
Please copy recordings you want to keep
to recordable DVD.
Press ENTER to continue.
ENTER
10 Select 'Finish Setup' to exit
the Setup Navigator, or 'Go Back' if you
want to start again.
k Setting
Line System S et up is compl ete!
er Save Enjoy usi ng your DV D rec order!
F inish S e tup Finish S et up
p Navigator p Navigator Go B ack
That completes basic setup using the Setup
Navigator.
• If there are blank channels with no
station, you can set these to skip using
the manual channel setting. See Manual
CH Setting on page 102.
04
29
En