Pioneer DVR-541H-S Operating Instructions Manual page 38

Recording
05
7 Move the cursor to the
recording end time on the grid.
Recording start time
Easy Timer Recording
11:00 12:00
1/01
2/01
3/01
1/01
SUN
2ch
As you move the cursor around the grid, an
arrow stretches from the start time to the
current cursor position, representing the
length of the recording. A recording of up to
six hours can be set.
ENTER
8 Set the end time.
9 Select 'Yes' to set the timer
recording and exit, or 'No' to go back to
the Easy Timer Recording screen.
• You can check the timer recording
details you just set from the main timer
recording screen (see Setting a manual
timer recording on page 40).
Timer recording using the VCR
Plus+ programming system
This system makes programming timer
recordings very simple. Most TV guides
publish PlusCode programming numbers
with their program details. If you want to
make a timer recording of a program, you
just input the corresponding code. The date,
start, stop and channel settings are made
38
En
Recording end time
13:00 14:00 15:00 16:00 17:00
11:45
– 13:45
REC MODE SP HDD/DVD HDD
automatically. All you have to do is tell the
recorder the recording mode, and whether
it's a once-only recording or a regular
recording.
Note that if the country setting is incorrect
(set in the Setup Navigator), timer
recordings made using the PlusCode
programming system may not work as
expected.
1 Press 'VCR Plus+' to display the VCR
Plus+ program screen.
You can also access this screen from the
Home Menu (press HOME MENU, select
Timer Recording, then VCR Plus+ system).
PlusCode#
1 2
4 5
7 8
0
• Use the number buttons to enter the
PlusCode programming number. (To
clear the last digit entered, press
CLEAR.)
• You can also use the
buttons to select digits from the on-
screen display.
2 After making the settings, select
'Enter' and press ENTER.
The timer recording screen appears with the
timer program you just set.
3 Confirm that the settings are correct.
If the channel number isn't displayed, use
buttons to highlight CH, then use
the
the buttons to set the correct channel
number.
3
6
Cancel
9
Detail
Clear Enter