Pioneer DVR-541H-S Operating Instructions Manual page 48

Recording
05
ENTER
7 Select 'Start Rec'.
1.02.22
Control with these
buttons
• You can pause or stop the recording by
selecting Pause Rec or Stop Rec from
the on-screen display. You cannot
control the camcorder from this remote
control during recording.
• If you restart recording after stopping the
camcorder, the first few seconds of the
camcorder tape will not be recorded.
Use the pause button on your camcorder
instead and recording will start
immediately.
• HDD, DVD (VR Mode) and DVD-RAM only:
A chapter marker is inserted every time
there is a break in the timecode on the
DV tape. This happens when the
recording is stopped or paused then
restarted, for example.
• While recording, you cannot exit the DV
recording screen using the HOME
MENU or RETURN button.
Note
1 If the audio subcode on the DV tape cannot be read correctly, the audio type will not switch automatically. You
can switch the audio manually from the External Audio setting (page 103).
48
En
Stop
Start Rec
Pause Rec
Stop Rec
HDD SP (2h00m/DVD)
Rem.
Frequently Asked Questions
• I can't get my DV camcorder to work with
the recorder!
Check that the DV cable is properly
Stop
connected. Also make sure that what
you're trying to record is not copy-
protected.
If it still doesn't work, try switching off
the camcorder then switch back on.
32h45m
• There's a picture, but no sound!
Try switching the DV Input setting (see
DV Input on page 103) between Stereo 1
and Stereo 2.
1