Receiving A Message - Panasonic KX-TG8011FX Operating Instructions Manual

TG8011-8021FX(e-e).book Page 37 Wednesday, August 20, 2008 9:50 AM
3
{V}/{^}: Select a message. i M
4
K i {V}/{^}: "Erase" i M
L To erase all messages, select
"Erase All". i M
5
{V}/{^}: "Yes" i M i {ih}

Receiving a message

When an SMS message is received:
– "Receiving SMS Message" is
displayed.
– a tone is heard (if the handset ringer is
turned on).
– h is displayed with the total number
of new (unread) SMS messages.
Reading a received message
1
K (middle soft key) i X i
M
2
{V}/{^}: "Receive List" i M
3
{V}/{^}: Select a message.
L Messages which have already
been read are indicated by a "Q",
even if they were read using
another handset.
L To erase a message, press W.
i {V}/{^}: "Yes" i M
4
Press M to read the message
content.
Note:
L To call the message sender, press
{C}.
Replying to a message
1
While reading a received message,
press K.
2
{V}/{^}: "Reply" i M
3
Enter a message (page 48). i
M
SMS (Short Message Service)
4
Edit the destination phone number
and/or press M.
5
Continue from step 5, "Writing and
sending a new message", page 36.
Editing/forwarding a message
1
While reading a received message,
press K.
2
{V}/{^}: "Edit Message" i M
3
Continue from step 3, "Writing and
sending a new message", page 36.
Erasing received messages
1
While reading a received message,
press K.
2
{V}/{^}: "Erase" i M
L To erase all messages, select
"Erase All". i M
3
{V}/{^}: "Yes" i M i {ih}
Storing the sender's number
in the phonebook
1
While reading a received message,
press K.
2
{V}/{^}: "Add Phonebook" i
M
3
To store the name, continue from
step 3, "Adding entries", page 21.
Editing the sender's number
before calling back
1
While reading a received message,
press K.
2
{V}/{^}: "Edit and Call" i
M
3
Edit the number. i {C}
37