Panasonic KX-TG8011FX Operating Instructions Manual page 53

TG8011-8021FX(e-e).book Page 53 Wednesday, August 20, 2008 9:50 AM
Problem
I do not know how to erase y
(Missed call) from the display.
Programmable settings
Problem
I have changed the display
language to a language I
cannot read.
While programming, the
handset starts to ring.
I cannot register a handset to a
base unit.
Battery recharge
Problem
The handset beeps and/or 3
flashes.
I fully charged the batteries, but
3 still flashes.
I fully charged the batteries, but
the operating time seems to be
shorter.
Useful Information
Cause/solution
L There are unviewed missed calls remaining.
View them and erase y in the following way.
1
K (middle soft key) i j i M
2
Press {V} to search from the most recent
call, or press {^} to search from the oldest
call.
Cause/solution
L Change the display language (page 17).
L A call is being received. Answer the call and
start again after hanging up.
L The maximum number of base units (4) is
already registered to the handset. Cancel
unused base unit registrations from the
handset (page 31).
L The maximum number of handsets (6) is
already registered to the base unit. Cancel
unused handset registrations from the base
unit (page 31).
L You entered the wrong PIN. If you forget your
PIN, contact your nearest Panasonic service
centre.
L Place the handset and the base unit away
from other electrical appliances.
Cause/solution
L Battery charge is low. Fully charge the
batteries (page 14).
L Clean the charge contacts and charge again
(page 14).
L It is time to replace the batteries (page 13).
L Clean the battery ends (S, T) and the
charge contacts with a dry cloth, and charge
again.
53