Assembly Instructions - Central Pneumatic 95498 Set Up And Operating Instructions Manual

1. Turn the Compressor's Pressure Switch (64) is in its
forming any service, maintenance, or cleaning of the Compressor.
2. To extend the life of your tools and equipment, it is recommended that you
install an oiler and water filter in-line with the Air Outlet Valve (68) of the Air Com-
pressor. (See Figure C.)
PIPE SEALANT TAPE
(NOT INCLudEd)
QuICK CONNECTOR
(NOT INCLudEd)
FIGuRE d
Prior to using the Air Compressor, the unit requires the attachment of a 1/4"-18
3.
NPT Male Quick Connector (not included). To do so, wrap approximately 3" of
pipe thread sealant tape (not included) around the male threads of the Quick Con-
nector. Then firmly screw the Quick Connector into the Air Outlet Valve (68).
(See Figure d.)
SKU 95498

ASSEMBLY INSTRuCTIONS

WRAP
AIR OuTLET VALVE
WITH
HERE
For technical questions, please call 1-800-444-3353.
"OFF" position prior to per-
(68)
Page 8