Central Pneumatic 95498 Set Up And Operating Instructions Manual page 3

2. dress properly. do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
3. Avoid accidental starting.
its "OFF" position before moving the Compressor and before performing any
service, maintenance, or cleaning procedures on the unit.
4. Remove adjusting keys or wrenches before turning the Compressor on.
wrench or a key that is left attached to a rotating part of the machine may result in
personal injury.
5. do not overreach. Keep proper footing and balance at all times.
ing and balance enables better control of the power tool in unexpected situations.
6. use safety equipment. Always wear eye protection. Always wear
ANSI-approved safety impact glasses and full face shield when using
this product. ANSI-approved hearing protection must also be used.
1. do not force the tool. use the correct tool for your application.
tool will do the job better and safer at the rate for which it is designed.
2. do not use the Compressor if the Compressor's Pressure Switch (64) does
not turn it on or off. Any tool that cannot be controlled with its Pressure Switch is
dangerous and must be replaced.
3. Store idle tools out of reach of children and other untrained persons.
are dangerous in the hands of untrained users.
4. Maintain tools with care.
easier to control. Do not use a damaged tool. Tag damaged tools "do not use"
until repaired.
5. Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool's operation. If damaged, have
the tool serviced before using. Many accidents are caused by poorly maintained
tools.
6. use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
1. Tool service must be performed only by qualified repair personnel.
maintenance performed by unqualified personnel could result in a risk of injury.
SKU 95498
Be sure the Compressor Control Knob (83) is in
TOOL uSE ANd CARE
Properly maintained tools are less likely to bind and are
SERVICE
For technical questions, please call 1-800-444-3353.
A
Proper foot-
The correct
Tools
Service or
Page 3