Central Pneumatic 95498 Set Up And Operating Instructions Manual page 11

To Stop The Compressor:
1. Push down on the Pressure Switch (64) to its
2. Unplug the Air Compressor from its electrical outlet.
3. Turn the Air Outlet Valve (68) to its
4. Squeeze the trigger on the pneumatic tool to release any remaining air pressure
from the tool. Then disconnect the air hose from the tool, and store the tool in a
clean, dry, safe location out of reach of children.
5. Disconnect the other end of the air hose from the Compressor's Air Outlet Valve
(68), and store the air hose in a clean, dry, safe location out of reach of children.
6. Pull out on the Safety Release Valve (62) to release all remaining air pressure from
the Air Tanks (51). (See Figure F.)
7. Remove any moisture in the Air Tanks (51) by opening the Tank Drain Valve (52).
Then, retighten the Drain Valve. (See Figure F.)
8. Allow the Air Compressor to completely cool. Then store the unit in a clean, dry,
safe location out of reach of children.
SKU 95498 For technical questions, please call 1-800-444-3353.
"STOP" position.
closed position. (See Figure F.)
Page 11