Setup Utility - Panasonic Toughbook CF-71 Series Reference Manual

Setup Utility

Running the Setup Utility
Closing the Program
To run the Setup Utility, you
need to restart your computer.
NOTE
The Setup Utility will not be run if
restarts. In this case, you need to restar t your computer again.
If is displayed, enter your password.
If both the [User Password] and [Supervisor Password] have been set, after enter-
ing the User Password, [Supervisor Setup] and [Load Default Setting...] will not be
displayed on the main screen.
To display the [Supervisor Setup]:
1
Restart the computer and press F1 when [Press F1 for Setup] is displayed.
2
When is displayed, enter the Supervisor Password.
For more details, on-line help is available; press
<Main Screen>
Setup Utility
•System Setup
•Power Management
•Supervisor Setup
Save Settings
Restore Settings
Load Default Settings (PnP)
Load Default Settings (Non-PnP)
Exit Setup
NOTE
Key Operations
:
F1 To display the correspond-
ing "help" file.
:
Enter To make a selection.
:
Esc To display previous screen
(To exit the program at the
main screen).
Select one of the items and press Enter .
Exit Setup
Settings were changed.
Do you want to save them?
Yes, save and exit the Setup Utility.
No, exit the Setup Utility without saving.
No, return to the Setup Utility.
(The display may be different if no changes to the settings are made.)
Upon seeing
this message
Press F1 for Setup
F1 is not pressed soon after the computer
F1 .
Return to the state existing at the time of
Setup Utility startup, or to the settings saved
with [Save Settings].
Set default settings.
•
(PnP) is for operating system that is com-
patible with the Plug & Play.
•
(Non-PnP) is for operating system that is
not compatible with the Plug & Play.
•
When the Supervisor Password has been
set, input of the password is necessary.
:
, To move among the items.
:
To move among the values
of each item.
:
F9 To return to the setting be-
fore a change.
:
F10 To set the default values.
NOTE
If the User Password has
been set, the password must
be entered before Windows
can start.
34
press F1