Using An External Display - Panasonic Toughbook CF-71 Series Reference Manual

Using an External Display

External Display Port
1
Power off your computer
Do not shut down using the suspend or hibernation mode.
CAUTION
Do not install or remove peripherals while your computer is in the
suspend or hibernation mode; abnormal operation may result.
2
Connect the external display to your computer
NOTE
For more detailed information, please refer to the operation manual of
the external display.
3
Turn on the external display, then turn on your computer
with the display opened
You can select either an external display, LCD or simultaneous with
+ F3 .
In addition, you can set the display to use during start-up with the follow-
ing procedure.
1
Run the Setup Utility
2
Using and
Enter
3
Using and
use with , then press Esc
4
Close the Setup Utility
4
Select your external display
Set your external display for [Monitor] in [Start] - [Settings] - [Control
Panel] - [Display] - [Settings] - [Advanced Properties].
When a monitor that does not conform to the Plug & Play standards is
connected, select [Change] and make the monitor settings.
( "Starting Up/Shutting Down")
( page 34)
, select [System Setup], then press
, select [Display], select the display to
( page 34)
28
Fn