Setting Power Management - Panasonic Toughbook CF-71 Series Reference Manual

Computing On the Road
NOTE
If you plan to use only the battery pack or set the power management, it is neces-
sary to check [Allow Windows to manage power use on this computer] in [Star t]
- [Settings] - [Control Panel] - [Power].
If the check is removed, the time may not be displayed properly when operation is
resumed from the suspend or hibernation mode or the operating time with the
battery pack may become short (the power management function of Windows
does not work).

Setting Power Management

(How to set [Advanced] and the suspend/hibernation timeout)
1
Run the Setup Utility
2
Using and
Enter
3
Using and
with
(To avoid setting the suspend/hibernation timeout, press Esc and proceed on
to step 6 .)
4
Using and
[Hibernation] with
5
Using and
either [4 min] or [16 min] with
6
Close the Setup Utility
( page 34)
, select [Power Management], then press
, select [Power Saving], then set [Advanced]
, select [Sleep Switch], then set [Suspend] or
, select [Suspend/Hibernation Timeout], set
, then press Esc
( page 34)
15