After Ironing; Vertical Steam Ironing - Philips GC6310 User Manual

EnGlish
10
 Put the mains plug in an earthed wall socket and set the iron switch to 'on'.
The soleplate starts to heat up.
,
 Iron without pressing the steam activator.
If you press the steam activator by accident while you iron, some steam will escape. To avoid
,
this, set the steam tank switch to 'off' to cut off the steam supply completely.
If the steam tank is empty or has not heated up yet, you hear a clicking sound inside the tank.
,
This phenomenon is caused by the opening of the steam valve and is perfectly harmless.

after ironing

1 Set the iron switch to 'on' and the steam tank switch to 'off'. (Fig. )
 Press the steam activator until you no longer hear any steam escape from the
appliance (Fig. 10).
The steam tank is now depressurised.
 Remove the mains plug from the wall socket.
 Put the iron on the iron stand and let the appliance cool down before you start to clean it.
Features

Vertical steam ironing

Never direct the steam at people.
To steam iron hanging curtains and clothes (jackets, suits, coats), hold the iron in vertical
,
position (Fig. 11).
1 Press the steam activator.
Variable steam (GC6320 only)
The steam control is continuously adjustable and can be set to any position between MIN and MAX
(see chapter 'Preparing for use').
Cleaning and maintenance
iron
Let the appliance cool down sufficiently before you clean the iron.
Never immerse the iron in water nor rinse it under the tap.
1 Clean the iron with a damp cloth.
 Wipe scale and any other deposits off the soleplate with a damp cloth and a non-abrasive
(liquid) cleaner.
steam tank
Let the appliance cool down sufficiently before you remove the steam tank cap.
Rinse the steam tank once a month or after you have used the appliance approximately 10 times.
1 Carefully remove the steam tank cap (Fig. ).
 Rinse the steam tank with 500ml of fresh water. Then hold the steam tank upside down over
the sink to pour out the water (Fig. 1).
 Screw the cap back onto the steam tank.