Download Print this page

Philips SpeedCare GC6602 Service Manual

Hide thumbs Also See for SpeedCare GC6602:

Advertisement

Quick Links

Philips Consumer Lifestyle
Service Manual
Product information
Fast & powerful crease removal
• Soleplate: Non-stick
• Vertical steam
• Steam pressure: 4 bar
• Power: 2400 W
• Continuous steam output: 90 g/min
Easy to use
• Water tank capacity: 1200 ml
• Filling and emptying water: Extra large filling hole
• Refill any time
• Heat-up time: 2 min
• Hose storage: Hose storage compartment
• Cord freedom (swivel): 180 degree cord freedom
• Hose length: 1.6 m
• Power cord length: 1.8 m
Calc management
• Suitable for tap water
• Calc clean solution: Smart Calc Clean
• Calc clean reminder
• Filtered water recommended
Safety Information
• This product meets the requirements regarding
interference suppression on radio and TV.
• After the product has been repaired, it should function
properly and has to meet the safety requirements
and legal regulations as officially laid down at this
moment.
Published by Philips Consumer Lifestyle
15/09
SpeedCare Steam Generator
Technical information
• Weight of iron
• Weight of iron + base
• Product dimensions
• Packaging dimensions
• Voltage
• Frequency
• Power
Printed in the Netherlands
: 1.2 kg
: 2.6 kg
: 19.8 x 21.7 x 34.6 cm
: 26.4 x 30.3 x 40.4 cm
: 220 - 240 V
: 50 - 60 Hz
: 2400 W
© Copyright reserved
GC6602
Subject to modification

Advertisement

loading

Summary of Contents for Philips SpeedCare GC6602

  • Page 1 • After the product has been repaired, it should function properly and has to meet the safety requirements and legal regulations as officially laid down at this moment. Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification...
  • Page 2 Disassembly advice - Iron GC6602 BUTTON 27 WIRE CONNECTOR 29 TOP COVER 20 CONNECTION WIRE ASM 28 CORD BUSHING 21 BASE 9 CONTROL & POWER PCBA 1, 23 SOLEPLATE ASSY 11 Remove Screw A1, A2 STEAM KNOB 4 Remove BUTTON 27 DIAL KNOB 19 Remove Screw B1...
  • Page 3 Disassembly advice - Stand GC6602 SCREW CAP 57 PUMP BRACKET 41, 44 SILICON CUSHION 56 PUMP ASSY 42 INSULATION BASE 55 CORD CLAMP 45 UNIT BASE COVER 51 CORD BOX COVER 50 BOTTOM FOOT 40 TERMINAL BLOCK 46 WATER TANK ASM 36 SWITCH BRAKET &...
  • Page 4 Part lists & Electrical diagram - Iron/Stand GC6602 Service code Description Service code Description 9965 100 73639 Control PCB assy Release button 9965 100 70251 Control PCB box 2 Spring 2 9965 100 70211 Lamp cover Lock fastener 9965 100 70201 Steam knob Location fastener 9965 100 70241...
  • Page 5 Exploded view - Iron GC6602...
  • Page 6 Exploded view - Stand GC6602...
  • Page 7: Repair Instruction

    Repair Instruction GC6602 • Due to the high wattage of the iron, only the specified cord set must be used. • Should damage be observed on the POWER CORD 52, it must be replaced. • Continued usage is not allowed. •...