Detecting Call Signal Clock Pulse Automatically - Philips FaxJet 520 User Manual

Detecting call signal clock pulse
automatically
(IPF¦525, IPF¦555) Type 3 (mit Telefon)
(Function is not supported in all countries and Function is not supported in all countries and networks
networks)
EN
If several call numbers with different call signal clock puls-
es are assigned to a telephone line by your network opera-
tor, the device can detect these automatically. This func-
tions only in the PHONE/FAX or TAD/FAX operating
modes.
Start automatic recognition
If you are using an external answering machine,
switch this off or disconnect it from the power sup-
ply. If the external answering machine is switched
on, the recognition of the call signal clock pulse can
be disrupted.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ INSTALLATION .
3 Confirm with o. STATION NAME appears on the
display.
4 Select using [ DISTINCT. RING .
5 Confirm with o. SET OPTION appears on the dis-
play.
6 Select using [ SET PATTERN .
7 Confirm with o. AUTODETECT RING appears on
the display.
8 Call the device with the desired telephone number (the
desired call signal clock pulse), until RING DETECT-
ED appears on the display of the device.
9 End the call on the caller's device.
10 Press j on the device.
The call signal clock pulse was stored.
If the call signal clock pulse is not detected by the de-
vice, RING NOT DETECT. appears on the display.
Press j and repeat the process.
Switch on the call signal clock pulse
After automatic recognition of the call signal clock pulse,
you must switch on this call signal clock pulse on your de-
vice.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ INSTALLATION .
3 Confirm with o. STATION NAME appears on the
display.
4 Select using [ DISTINCT. RING .
5 Confirm with o. SET OPTION appears on the dis-
play.
6 Confirm with o.
7 Select using [ YES .
8 Confirm with o.
9 You can exit with j.
32 Philips IPF 520 · 525 · 555