Using Component Video Jacks (Pr Pb Y); Scan Mode (Progressive/Interlace Selector) - Philips DVP9000S/93 User Manual

Philips cineos dvd/sacd player dvp9000s
Table of Contents

Advertisement

Connections
Back of TV
IN
COMPONENT
VIDEO IN
S-VIDEO
AUDIO
IN
Pr/Cr
IN
Pb/Cb
VIDEO IN
Y
1
2
CAN MODE
Pr
Pb
Y
PCM /
INTERLACE
COMPONENT
DTS / MPEG
PROGRESSIVE
VIDEO
COAXIAL
S-VIDEO
VIDEO OUT
DIGITAL OUT
IMPORTANT!
– The progressive scan video quality
is only possible when using Y Pb Pr
and a progressive scan TV is
required.
– DO NOT connect both video and
Y Pb Pr to a TV, it may affect the
picture quality.
Using Component Video jacks
(Pr Pb Y)
1
Use the component video cables
(yellow, red, white) to connect the DVD
Player's Pr Pb Y jacks to the
corresponding Component video in jacks
(labeled as Pr / Cr Pb /Cb Y or YUV) on
the TV (cable supplied).
2
Set the SCAN MODE switch to
PROGRESSIVE.
3
To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT
(L/R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied).
8
01-39 DVP900_69_Eng3
IN
COMPONENT
VIDEO IN
S-VIDEO
IN
Pr/Cr
AUDIO
IN
Pb/Cb
VIDEO IN
Y
3
CENTER
DIGITAL/
L
L
L
R
R
R
SUB WOOFER
MAIN
SURROUND
OPTICAL
MIXED 2CH
6CH DISCRETE
AUDIO OUT
8
SCAN MODE
Pr
Pb
Y
HDMI
INTERLACE
COMPONENT
PROGRESSIVE
VIDEO
S-VIDEO
VIDEO OUT
Scan Mode
(Progressive/Interlace selector)
This switch will change the type of signal
output from the Component Video Out
on the DVD player.
Interlace:
Select this setting when connected to a
standard (interlace format) TV.
Progressive:
Select progressive when you have a TV
that can accept progressive signals (480/
525p) to enjoy accurate colour
reproduction and high quality images.
Helpful hints:
During Progressive mode, 4:3 aspect
images are distorted when TV Shape is set to
'16:9' . Change the TV screen's aspect ratio
settings to AUTO to avoid image distortion.
(see page 29 "4:3 Aspect").
Some TVs and projectors are not
compatible with this DVD Player. If picture
distorted during progressive signals, switch
the SCAN MODE to Interlace.
20/01/2005, 4:22 PM
PCM /
DIGITAL/
DTS / MPEG
COAXIAL
OPTICA
DIGITAL OUT
3139 246 13783

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvp9000s/69Dvp9000s

Table of Contents