Setting Up Progressive Scan Feature (For Progressive Scan Tv Only) - Philips DVP5960 User Manual

Getting Started
0
0
0
0
0
Setting up Progressive Scan feature
(for Progressive Scan TV only)
The progressive scan display twice the
number of frames per seconds than
interlaced scanning (ordinary normal TV
system).With nearly double the number
of lines, progressive scan offers higher
picture resolution and quality.
IMPORTANT!
Before enabling the progressive scan
feature, you must ensure:
1)YourTV can accept progressive signals,
a progressive scan TV is required.
2) You have connected the DVD player to
yourTV usingY Pb Pr (see page 11.)
Turn on yourTV.
Turn off your TV progressive scan mode
or turn on interlaced mode (refer to your
TV user manual.)
Press POWER
((f))
on the remote
control to turn on the DVD player.
Select the correct Video Input channel.
(See page 19).
-! The DVD background screen appears
on the TV
Press SETUP.
0
Press ► to select {VIDEO SETUP PAGE}.
-- Video Setup Page --
© Select {PROGRESSIVE} to {ON}, then OK
to confirm.
'9 The instruction menu appears on the
TV.
0
Press / to highlight;
oK
and press OK to confirm.
There will be a distorted picture on
yourTV at this state until you turn
on the progressive scan mode on
your TV.
0
Turn on your TV progressive scan mode
(refer to your TV user manual.)
-! The below menu appears on the TV
O
Press t to highlight
and press OK to confirm.
-> The set up is complete now and you
can start enjoy the high quality picture.
To deactivate Progressive manually:
• Wait for 15 seconds for auto recovery.
OR
Press OPEN CLOSE ! on the DVD
player to open the disc tray.
© Press numeric keypad `1' on the
remote control for few seconds.
'9 The DVD background screen appears
on the TV.
in the menu
OK
in the menu
Helpful Hint
- There are some progressive scan TV and
High -Definition TV sets that are not
fully
compatible with this DVD system, resulting in
the unnatural picture when playing back a
DVD VIDEO disc in the progressive scan
mode. In such a case, turn
off
the
progressive scan feature on both th e DVD
player and your TV set
The underfingd option is ttiie default setting.
Press f to go back to d*previous menu item. Press SETUP to exit the menu item.