Basic Connections - DVD recorder
VCR/Cable Box/
Satellite Receiver
A
B
Step 1: Connecting the
antenna cables
These connections enable you to
watch and record TV programmes using
the DVD recorder. If the antenna signal is
connected via a VCR, Cable Box or
Satellite Receiver, ensure that
these devices are turned on in order to
watch or record the cable programmes.
If you want to connect to a VCR
and/or Cable Box/Satellite Receiver,
see page 15~17 for the complete
connection to your TV.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
12
1_dvdr3355_eu_eng_15891.indd 12
Antenna/
cable TV signal
TV
S-V ID E O
AU D IO
IN
O U T
V ID E O IN
Connect existing Antenna/Cable TV
A
signal (or from the Cable Box/Satellite
Receiver {RF OUT or TO TV}) to the
ANTENNA
socket on the DVD
recorder.
Use the supplied RF coaxial cable to
B
connect TV
socket on the DVD
recorder to the antenna input socket on
your TV (VHF/UHF RF IN).
2005-04-27 2:35:30 PM