Step 1: Basic Recorder Connections
CABLE
A
B
Connecting the antenna
cables
These connections enable you to watch
and record TV programs using the
recorder. If the antenna signal is
connected via a VCR, Cable Box or
Satellite Receiver, ensure that these
devices are turned on in order to watch
or record the cable programs.
If you want to connect to a VCR
and/or Cable Box/Satellite Receiver,
see the chapter "Step 2 : Optional
Connections" for the complete
connections to your TV.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
14
ANTENNA
SATELLITE
TV
S-V ID E O
AU D IO
IN
O U T
V ID E O IN
A
Connect the existing Antenna/Cable TV
signal (or from the Cable Box/Satellite
Receiver {RF OUT or TO TV}) to the
ANTENNA-IN
recorder.
B
Use the supplied RF coaxial cable to
connect TV-OUT
recorder to the antenna input jack on
your TV (VHF/UHF RF IN).
Helpful Hint:
– Depending on how you have currently
connected your TV channel (directly from an
off-air antenna or Cable box or VCR), you
will have to disconnect some of the cables
before you make the above connection.
jack on the
jack on the