Setting The Volume; Setting The Display's Working Language; Setting Up The Data Function - Motorola TETRA MTH800 Feature User Manual

Setting the Volume

Once in the menu, select
This sub-menu allows you to adjust the
ringer, earpiece, speaker, and keypad tone
volume.
To set the volume:
1. From the main menu, select Setup >
Volume.
2. Scroll through the list.
3. Choose the required item, and press
4. Adjust the volume level. A feedback tone is heard, and a
volume level bar is displayed.
5. ress
P

Setting the Display's Working Language

From the main menu, select Setup >
Language
The display shows the current language
used. You can customize your MTH800 to
operate in English, German, French,
Spanish, Dutch, or in a language defined by
your Service Provider. The default setting
from factory is English.
Scroll to the desired language and press
shows the selected language for a few seconds.

Setting Up the Data Function

You can connect the MTH800 to an external device (such as
a laptop or desktop PC). The MTH800 will then be capable
of transmitting and receiving data from the external device.
To connect the MTH800 accessory connector to the external
device, use cable FKN4897. The external device must run an
application complying with the TETRA standards.
3 Set Volume.
to exit.
Back
.
Volume
Ringer Vol: 0_
Earpiece Vol: 1_
Speaker Vol: 1_
Keypad Vol: 0_
Change Done
Change.
Language
English
Deutsch
Français
Español
Nederlands
Select Back
The display
Select.
83