Motorola TETRA MTH800 Feature User Manual page 54

• None: the MTH800 will not use a gateway
for that talkgroup.
• Automatic: the MTH800 will use the first
available gateway for that talkgroup. The
Gateway icon will flash until the terminal
finds an available gateway.
• Specific: the MTH800 will use a specific gateway for that
talkgroup.
Upon selecting "Specific", you will see one of the following
displays:
• The selected gateway address (e.g.:
1022), pre-programmed by your Service
Provider or previously entered by yourself
via the keypad. Press
address, or enter a new address via the
keypad, and press
will flash until the terminal finds an available gateway.
• "None", indicating that no specific gateway
was selected for that talkgroup. Enter an
address via the keypad, and press
Gateway icon will flash until the terminal
finds an available gateway.
Pressing
to be displayed for a few seconds: "No Specific Gateway
Was Selected". The MTH800 exits the Gateway menu option
and the previous gateway type will be selected.
When the MTH800 is synchronised with the gateway, the
Gateway icon will be solid.
3. To place the call, proceed as explained on page 43.
If you press
will start a DMO call without gateway. The Gateway icon
will disappear.
If you press
gateway is available, but the call is
rejected by the gateway, your MTH800
will sound a tone and display the
44
Ok
Ok.
causes the following message
Back
while the gateway is not available, you
PTT
while the selected
PTT
to use the current
The Gateway icon
Ok.
GW Options
None
Automatic
Specific
Select Back
Selected
Gateway:
1022
Ok Back
The
Selected
Gateway:
None
Ok Back
Direct Call
Not Via
Gateway