Change Code - Motorola TETRA MTH800 Feature User Manual

Incorrect Code Entered
failing, your MTH800 will be blocked. Please check with your
Service Provider how many failed attempts are allowed.
How to unblock the MTH800
The display shows
Emergency Call.
To unblock the MTH800, enter the PUK (Personal
Unblocking Key). The PUK is an eight-digit master code to be
obtained from your Service Provider.
After entering the PUK successfully, you will be prompted to
replace the forgotten code.
At the
New Code?
repeat the code to confirm. If the code does not match, you
will be prompted to enter it again until the new code message
is accepted.

Change Code

From the main menu, select > Security >
The default PIN code is 0000.
At the
Old Code?
code does not match the entered code at verification, the
display prompts you to re-enter the old code.
If the entered code matches the old code, the display
prompts you to enter a new 4-digit code and to repeat it for
confirmation. If the confirmation code does not match the
new code, the display prompts you to re-enter the new code.
When the new code is accepted, the display returns to the
Security sub-menu.
78
—You are prompted to try again. After
You send or receive calls an
Unit Blocked
.
prompt enter the new 4-digit code, and
prompt, enter the 4-digit code. If the old
Change Code
.