Entering The Testpage - Motorola TETRA MTH800 Feature User Manual

Tetra handportable terminal
Hide thumbs Also See for TETRA MTH800:
Table of Contents

Advertisement

In most cases, your terminal will be able to get a fix in strong
satellite signal conditions with outdated almanac data, but it
may take longer.
When you make an Emergency Call, your terminal does not rely upon the
almanac to determine your location.

Entering the Testpage

The Testpage provides GPS information (such as the
number of satellites used, the strength of each one, etc.).
1.
From the main menu,
select More...> Location > Testpage.
2.
Scroll to your selection and press
to access the next display.
Position
1. From the main menu,
cation > Testpage > Position.
2. Scroll to your selection and press Select to access the
next display.
This displays the following information about
the last time your location was calculated:
• The time the location was last calculated
• The latitude expressed in degrees, min-
utes, and seconds
• The longitude expressed in degrees, min-
utes, and seconds
• The altitude expressed in meters
• The number of satellites used
• The bearing (B) - refers to the direction to
a waypoint
• The horizontal speed (HS)
• The level of confidence in percent (LC)
66
and
press
Select
and select More...> Lo-
press
Testpage
Position
Power
Version
Select
Back
Position
<Time>
<Latitude>
<Longitude>
<Altitude>
<Tracked satellites>
Rfrsh
More
Position
<Tracked satellites>
<Bearing>
<Horizontal Speed>
<
>
Level of Confidence
Rfrsh
Back

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents