Security; Pin Protect - Motorola TETRA MTH800 Feature User Manual

Security

From the main menu, select > Security.

PIN Protect

Network access protection is configured by
your Service Provider:
• No access to network operation — you can
only send or receive Emergency Calls and
adjust the volume level. Unit lock takes effect at the next
power on.
To protect access to network operation:
1. From the main menu, select > Security >
is highlighted.
2. Press
3. At the
0000). To avoid disclosure of the code, asterisks are dis-
played instead of the code digits. The display will show
the following message:
Unit Locked
returns to the Security sub-menu and shows the active
setting:
On
To unlock the MTH800 before powering off:
1. From the main menu, select > Security >
is highlighted.
2. Press
3. At the Code? prompt enter the 4-digit code.The display
will show the following message:
Unit Unlocked
returns to the Security sub-menu and shows the active
setting:
Off.
To unlock the MTH800 after powering on, enter the code at
the prompt. The MTH800 enters the Home display.
If you fail to enter the correct code, the following message will
be displayed:
.
Select
prompt enter the 4-digit code (factory setting
Code?
—you entered the correct code. The display
.
.
Select
—you entered the correct code. The display
Security
PIN Protect
Change Code
Keylock
AirEncrypt
K Validity
Select Back
. On
PIN Protect
. Off
PIN Protect
77