Finish The Installation - Hans Grohe Lavatory Faucet 06653XX0 Installation Instructions / Warranty

All models: Hold the lever in the desired "off"
position with one hand.
With the other hand, turn the bell clockwise, so
that it threads down over the valve stem.
Install the pull rod
Solaris E, Stratos E, Metro E, and Swing C
only: The pull rod is curved. It should be installed
with the curve as shown in the diagram.
Tango C and Limbo C only: The pull rod is
straight.

Finish the installation

Install the pop up drain.
Install the supply lines (not included) according to the manufacturer's directions.
Turn on the water and check for leaks.
5