Connecting From Remote Client Program - Monacor DVC–4 IO User Manual

7.2 Connecting From Remote Client Program

In order to server, just click CONNECTION BUTTON. Then the below dialog box will come out.
1. Select Server Name from the list.
2. Enter ID and Password, which should be registered on User Registeration Setup from server side.
3. Click connection button in order to connect.
4. Click cancel button to cancel.
LAN check box from Network Setup on server side should be checked on to allow remote access.
Please make sure that video port 8100 (if not changed from server side) is forwared to the DVR if it's behind router or
firewall. And make sure to check on "Share IP" option so that server program can get correct global IP information.
In order to view images through remote client, Direct X 8.1 or above should be installed on client PC.
Monacor international Co., Ltd.
83