33
3.7 Emergency Recording
This function enables the current recording mode to switch to continuous recording and higher frame rate recording while
the button is pressed in the emergent case.
The default frame rate for emergency recording is 5fps.
1. Emergency Recording Setup should be done first..
2. You can enter the Setup by moving to "Recording Schedule Setup\Emergency Recording Setup" or right-mouse-
clicking on Emergency Recording Button. Check on video channels to run emergency recording on and set emergency
frame rate each. Or if you want to apply the same frame rate to whole channels, check on "Apply All(fps)", then set frame
rate.
3. While in emergency recording mode, the recording will be by the frame rate set from "Emergency Recording Setup"
contiously. For stopping emergency recording, press the button again.
Monacor international Co., Ltd.