Setting Pan/Tilt - Monacor DVC–4 IO User Manual

5.3.3 Setting Pan/Tilt

In order to set pan/tilt properties, click PAN/TILT SETUP button and select each camera icon on the above.
1
8
1. RX Type Selection : Select the model of RX.
2. Out Port Selection : Select the COM port which connects to converter.
3. RX Address : Select the Address No. which exactly matches with one of the RX.
4. Pan Invert : Check on the box to make pan direction inversed.
5. Tilt Invert : Check on the box to make tilt direction inversed.
6. Zoom In/Out Invert : Check on the box to make zoom in/out fuction work inversed.
7. Display RX Button : Check on the box to display the pan/tilt icon on the camera view.
8. Lamp On Time After Motion : Check on to make the lamp attached on PTZ camera turned on when motion event
happens. Adjustable time is 1 to 5 seconds.
9. PTZ Movement Test : Use the buttons to test PTZ movement after setting PTZ properties in advance.
Monacor international Co., Ltd.
61
2
3
4
5
6
7
9