Voice Communication - Monacor DVC–4 IO User Manual

3.11 Voice Communication

While the users monitor the remote DVR from Remote Client Program, they can talk with the personnel at the DVR site
through internet using this two-way voice communicaton function.
Make sure that your PC speaker and microphone are properly connected to Line-out and MIC port on
soundcard.
1. Setup From DVR Server
For two-way communication, Voice Network option must be checked on from Network Setup.
Check on to receive voice
data without counterpart's
2. Setup From Client Side
The same procedure is required at Client Option Setting from remote client site.
3. Starting Voice Communication
Press Voice Communicaton Button to start from DVR Server or Remote Client Program.
4. Sound Hardware Test Wizard
If it's the first time for using Voice Communication, Sound Hardwar Test Wizard will start upon pressing the button.
1) Press Next when Sound Hardwar Test Wizard starts.
acceptance
Monacor international Co., Ltd.
Enter the name you desire to
display in Voice Communication
Program.
Enter port no. for voice
commnication.
Default : 8500
40