Camera Setup - Monacor DVC–4 IO User Manual

5.3 Camera Setup

Camera Setup mode allows you to set camera functions indivisually. There are three functional parts, General, Motion &
Color and Pan/Tilt.
1
1. You can select indivisual camera button to set its property by clicking on it. Doubleclick on camera button will repeat
activation and inactivation of each channel. After program installation, only no.1 channel will activate. Therefore, all
camera buttons should be doubleclicked indivisually. Or press "Activate All Camera" to activate all at one time.
: the channel selected ,
2. Click one of three functional buttons in order to set camera properties. User "Acvatie All Camera" button to enable all
channels at the same time.
General Setup
2
: the channel activated ,
Motion & Color
Setup
Monacor international Co., Ltd.
: the channel inactivated
Pan/Tilt Setup
58