Driver Installation - Monacor DVC–4 IO User Manual

2.1 Driver Installation

1. Simply run "DVRDriverSetup.exe" in "Driver-2005-00-00" folder in CD-Rom provided.
2. Then DVR Device Driver Setup program will come out as shown below. Select one installation option.
- Install DVR Device Driver : select when installing to a new computer after the new capture card assembly
- Remove & Install DVR Device Driver : select when reinstalling to the existing device driver with the latest driver
- Remove DVR Device Driver : select to delete all DVR device driver of our capture card
- Remove any DVR Device Driver associated by BT878 : select to delete all device drivers relating BT878
(Usable when other brands capture using BT878 was installed previously)
3. Press OK. Then the system will reboot after completion.
Device Manager View After Driver Installation
Monacor international Co., Ltd.
19