Connecting With A Computer (Analog Connection) - Mitsubishi Electric LDT422V User Manual

P-4 Connection procedure (continued)

Connecting with a computer (analog connection)

The monitor automatically distinguishes the timings shown in the table below and sets the screen information. When a PC or other
device is connected, it automatically displays images properly.
<Factory preset timing>
Frequency
Resolution
Horizontal
1 640 x 480 31.5 kHz
2 800 x 600 37.9 kHz
3 1024 x 768 48.4 kHz
4 1280 x 768 48.0 kHz
5 1360 x 768 47.7 kHz
NOTE:
When a signal other than 1920x1080 is input, characters may be blurred and fi gures and objects may be distorted.
Images may not be displayed correctly depending on the video card or driver being used.
Analog connection:
• Connection via RGB3 IN (D-SUB) connector
(1) Connect an RGB cable (mini D-SUB 15-pin – mini D-SUB 15-pin) (accessory) to the RGB3 IN connector.
(2) Select [RGB3] using the INPUT button on the monitor or the D-SUB button on the wireless remote control.
• Connection via RGB4 IN (BNC: R•G•B•H•V, or R•G•B•Csync, RGB sync on green) connector
(1) Use a BNC cable (BNC x 5 - BNC x 5) (commercially available) to connect the BNC connector on the PC, and use a signal
cable (mini D-SUB 15-pin - BNC x 5) (commercially available) to connect the mini D-SUB 15-pin connector on the PC.
(2) Select [RGB4] using the INPUT button on the monitor or the BNC button on the wireless remote control.
Second monitor connection:
• Connect the RGB OUT connector (mini D-SUB 15-pin) on the fi rst monitor and the RGB3 IN connector (mini D-SUB 15-pin)
on the second monitor using an RGB cable (mini D-SUB 15-pin - mini D-SUB 15-pin) (an accessory of the second monitor or
commercially available).
(The RGB3 or RGB4 signal selected by the fi rst monitor is output. The RGB1 or RGB2 signal isn't output.)
Audio connection:
• Connect an audio cable (ø3.5 mm stereo mini) (commercially available) to the AUDIO IN1 connector.
Select [AUDIO1] using the AUDIO INPUT buttons on the wireless remote control.
• To output audio to the second monitor:
Connect the AUDIO OUT connector on the fi rst monitor and the AUDIO IN2 or 3 connector on the second monitor using an RCA
cable (audio) (commercially available).
LCD monitor (rear)
LCD monitor (second monitor)
(Multi-connection)
Remarks
Vertical
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
Personal computer
(Analog RGB)
RGB cable
RGB3 IN (D-SUB)
(Mini D-SUB 15-pin to
Mini D-SUB 15-pin)
AUDIO IN2 (RCA)
RCA cable (audio)
Resolution
Horizontal
6 1280 x 1024 64.0 kHz
7 1600 x 1200 75.0 kHz
8 1920 x 1080 67.5 kHz
9 1920 x 1200 74.0 kHz
To BNC output
RGB cable
(Mini D-SUB 15-pin to
Mini D-SUB 15-pin)
VIDEO IN
G B R
HDMI
DVI IN
RS-232C IN
V H
D-SUB OUT
D-SUB IN RS-232C OUT
VIDEO OUT
English-18
Frequency
Remarks
Vertical
60 Hz
60 Hz
60 Hz Recommend timing
60 Hz
Personal computer
(Analog RGB)
To D-SUB output
To audio output
Audio cable
(ø 3.5 mm stereo mini)
LCD monitor (fi rst monitor)
S-VIDEO IN2
IN3
L R
IN1 OUT