Connecting A Video Device (Composite Video/S Video Device)/Stereo Amplifi Er - Mitsubishi Electric LDT422V User Manual

P-4 Connection procedure (continued)
Connecting a video device (composite video/S video device)/stereo amplifi er
This monitor can be connected to a stereo amplifi er.
Refer to the user's manual of the stereo amplifi er for details. (Cables shown in the fi gure below are commercially available.)
• To connect a video device to the VIDEO IN connector (VIDEO IN or S-VIDEO IN) on the monitor, use a BNC cable or an S video
cable. For connection to the audio input connector on the monitor, use an RCA cable (audio cable). Connect the connectors
of the RCA cable (audio) correctly. For connection to the VIDEO IN connector, select [VIDEO] using the INPUT button on the
monitor or the VIDEO button on the wireless remote control. For connection to the S-VIDEO IN connector, select [VIDEO<S>]
using the INPUT button on the monitor or the VIDEO(S) button on the wireless remote control.
• When connecting a stereo amplifi er to the monitor, be sure to turn off the power of the stereo amplifi er. For connection to the
audio output connector on the monitor, use an RCA cable (audio). Connect the connectors of the RCA cable (audio) correctly. Be
sure to turn on the monitor fi rst, and then turn on the stereo amplifi er.
• The selected audio input signal is output from the AUDIO OUT connector.
(composite video/S video device)
LCD monitor (second monitor)
RCA cable (audio)
S video cable
G R
B
DVI IN
V H
D-SUB OUT
D-SUB IN
VIDEO IN
BNC cable
Video device
VIDEO IN
English-21
LCD monitor (rear)
S-VIDEO IN AUDIO IN2
VIDEO IN S-VIDEO IN2
HDMI
RS-232C IN IN3
L R
IN1 OUT
RS-232C OUT VIDEO OUT
AUDIO OUT
VIDEO OUT
External speaker
LCD monitor (fi rst monitor)
Stereo amplifi er
External speaker