Connecting With A Computer (Analog Connection) - Mitsubishi Electric LDT462V User Manual

P-4 Connection procedure (continued)

Connecting with a computer (analog connection)

Analog connection:
(1) Connect a signal cable (mini D-SUB 15-pin – mini D-SUB 15-pin) (accessory) to the D-SUB IN connector.
(2) Select [D-SUB] using the INPUT button on the monitor or the D-SUB button on the wireless remote control.
Second monitor connection:
• Connect the D-SUB OUT connector (mini D-SUB 15-pin) on the fi rst monitor and the D-SUB IN connector (mini D-SUB 15-pin)
on the second monitor using a signal cable (mini D-SUB 15-pin – mini D-SUB 15-pin) (an accessory of the second monitor or
commercially available).
(The analog input signal of D-SUB selected by the fi rst monitor is output. The digital input signal of HDMI or DVI-D is not output.)
NOTE:
When different monitors need to be adjusted so that their tint can be identical, such as when using multiple screens, it is
recommended to use a signal distributor (commercially available).
Audio connection:
• Connect an audio cable (ø3.5 mm stereo mini) (commercially available) to the AUDIO IN1 connector.
Select [AUDIO1] using the AUDIO INPUT buttons on the wireless remote control.
• To output audio to the second monitor:
Connect the AUDIO OUT connector on the fi rst monitor and the AUDIO IN2 connector or AUDIO IN3 connector on the second
monitor using an audio cable (RCA) (commercially available).
Personal computer
(Analog RGB)
To audio output
To D-SUB output
LCD monitor (fi rst monitor)
D-SUB IN
Audio cable
(ø 3.5 mm stereo mini)
Signal cable
(Mini D-SUB 15-pin to Mini D-SUB 15-pin)
Signal cable
(Mini D-SUB 15-pin to Mini D-SUB 15-pin)
AUDIO IN2 (RCA)
English-18
AUDIO IN1
D-SUB IN
(mini)
D-SUB OUT AUDIO OUT (RCA)
Audio cable (RCA)
LCD monitor (second monitor)