Table of Contents
Advertisement
To select an active IP (Internet Protocol) Address,
Press
1
Select 1 Select IP.
2
Enter Security Code and press OK softkey.
3
Select NEI 1 or NEI 2 and press OK softkey.
4
To select a Gateway (proxy server),
Press
1
Select 2 Select Gateway.
2
Select Gateway A or Gateway B and press OK softkey.
3
To select a CDPD Side preference,
Press
1
Select 3 CDPD Side.
2
Select A, B, Prefer A, or Prefer B and press OK softkey.
3
To enable/disable the CDPD Sleep mode,
Press
1
Select 4 CDPD Sleep.
2
Select Disable or Enable and press OK softkey.
3
Voice Network
To choose your voice network telephone number (if available),
Press
1
Your own Phone Number displays.
2
If you have more than one number provisioned for the
phone, you may select the number you wish to use.
LCD Contrast
To adjust contrast in the display screen,
Press
1
Press up or down arrow to select from 0-7 levels.
2
Press OK softkey to return to the previous screen.
3
and select 4 Preferences, 4 Data Network.
and select 4 Preferences, 4 Data Network.
and select 4 Preferences, 4 Data Network.
and select 4 Preferences, 4 Data Network.
and select 4 Preferences, 5 Voice Network.
and select 4 Preferences, 6 LCD Contrast.
Default setting = NEI 1
Default setting = Gateway A
Default setting = Prefer A
Default setting = Enable
Default setting = 4
47
Advertisement
Table of Contents
